It’s important to be careful when first grasping the broken key bit, because grabbing it incorrectly with pliers can inadvertently send it further into the lock. This is a boxed key extractor set which allows the extraction of keys from both wafer and pin tumbler locks. To operate a key extractor, stick it into the keyway and push all of the pins up as high as they’ll go with the extractor. Visit us at our trade counter Unit 10 Haines Park, Grant Avenue, Leeds, LS7 1QQ or contact us on 0113 345 0920.

Locksmiths have a special key extraction tool that works similarly to the way that a mini hacksaw or jigsaw blade might. Before trying to remove the broken key bit from the lock, it would be a good idea to first spray a lubricant into the keyhole and around the broken piece. David conceived of Room Escape Artist because he saw the potential of this new entertainment medium back in 2014. Put a single drop of superglue on the tip of the matchstick, paperclip, or similar object and carefully insert it into the keyhole making sure not to touch the sides.length: about 11cm Needle length: about 9cmColour:blackMaterial:MetalPackage Contents:1 x broken key extractor kitOnly the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing.

Removes broken keys from cylinder disk or pin locks, car locks, door locks, padlocks, patio door locks etc.Most locks found in residences and escape rooms within the United States have wide-open keyways, so the shape of your extractor doesn’t matter so much. Always remember that a key broken off in a lock shouldn’t be touched or messed with unless there’s a strategy behind it. Its ultra-thin design allows it to easily reach and extract keys that are stuck in tight spaces, making it perfect for use on residential, commercial, and automotive locks. With the average household having around 50 locks in use at any one time, having a decent set of tools in case some extraction is required makes sense, especially when the only alternative is to replace the lock. We don’t recommend this method as it could potentially damage the lock, however, some have reported success with this method, so we have included it anyway.

Designed for all types of locks, wafer, pin, lever, and different sizes of locks, a desk drawer, a cabinet, a front door lock, etc, these kits will make sure you have the best possible chance of removing the obstruction without damaging the lock. Sometimes a Customs Fee is charged, then the package is picked up from the post office, or when it is delivered - unfortunately, we cannot be responsible these fees - check on the internet for any potential fees that might be incurred. By pushing the extraction tool deep into the top part of the keyhole, the broken key can catch on the groves when pulling out the tool, removing the broken bit. By bending a paperclip into a straight line, the paperclip can be inserted into the top of the keyhole above the broken key bit. The best way to get a broken key out a lock is to carefully prepare both your key extractor tool set and the lock itself.Make sure you have all bases covered by adding this kit to your set of universal, always-useful tools.